CASTLE EURO Manual de Instalação descarregar pdf (Página 38)

EURO Programming Manual

Page: 38 RINS1291-3

4.15.2 STU / ATE Pin Output (Defaults)

Any communicating device with the industry standard footprint may be plugged onto the ATE

pins on the EURO plus ATE Utility PCB. The default types for the footprint are as follows:

(For the diagram of the communication loom please see the Installation Manual):

ATE OUPUTS EURO 28 EURO 44/76/162/280

1 (Blue) Fire (0001) Fire (0001)

2 (Orange) HU Device Any (0009) HU Device Any (0009)

3 (Yellow) Unconfirmed Any (0018) Unconfirmed Any (0018)

4 (Brown) Final Set Any (0022) Final Set All (0004)

5 (Purple) Tamper Any (0007) Tamper Any (0007)

6 (Green) Omit Rearm Any (0017) Omit Rearm Any (0017)

7 (Black) Confirmed Any (0006) Confirmed Any (0006)

8 (Purple) Mains Fail (0052) Mains Fail (0052)

9 (White) Global Fault 2 (0056) Global Fault 2 (0056)

10 (Light Grey) Test ATS (0064) Test ATS (0064)

NOTE: There is an “Invert ATE outputs” option for use with positive removed/applied

signalling Please see ‘Site Options, page 42.

These are programmed in ‘Change Outputs’ under ‘Endstation Output’.

For programming of the onboard Digi channels please see page: 54

4.15.3 External Reader Output

The RED LED on the external reader can be programmed so that it follows an output.

To achieve this, go to ‘CHANGE OUTPUTS’ and then ‘Reader Output’ and program the first

output to whichever type is required.

For example you may want the Prox to show the system set, therefore you can use the output

“0204: Final Set A”. The RED LED will then be illuminated once Area A has set.

Change Outputs

Using the and keys, scroll to

‘CHANGE OUTPUTS?’

Press the key

Endstation Outputs

To program the control panel outputs and

the ATE pins press the key.

OUTPUT

Select the output type for the Output and

press the key. Repeat for each output.

ATE PINS

When the display shows “ATE pin” you can

decide what you would like the STU / ATE

pins to be programmed as. Select the output

type for the ATE pin and press the  key.

Repeat for each pin.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 67 68

Comentários a estes Manuais

Sem comentários

CASTLE EURO Manual de Instalação Página 38

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso CASTLE EURO