CASTLE EURO Manual de Instalação descarregar pdf (Página 7)

Programming Manual EURO

RINS1291-3 Page: 7

CHAPTER 2: THE ENGINEERS MENU

In order to program system configurations from the keypad, you must be in the Engineer

Menu. The panel will enter the Engineering Menu after entering a valid engineer code when the

panel is in an unset state. Whilst in Engineer Mode all tamper alarms (including case tamper),

will be disabled.

2.1 Entering The Engineers Menu

NOTE: You will not be able to access Engineers Mode if Areas or Set levels are set.

The system must be fully unset

in order to gain access to the Engineer Menu. Access

maybe also denied if the user has disabled the “Allow Engineer Menu” in the Master

Manager Mode ‘Authorisation Required’ will be shown.

 Enter Engineer Code (default 1111).

 Any active faults will be shown. Press the

key.

 “SET / UNSET SYSTEM?” will be

displayed.

 Press the  key.

 “FORCE ARM ON 1

INPUT [01]” will be

displayed.

 Press the  key.

 ENTER CODE” will be displayed and a

pulsed tone will be heard.

 Enter Engineer Code (default 1111).

 “INHIBIT FIRE / HU?” will be displayed

Once you are in the Engineer Menu, a high pitch tone will be generated regularly to remind you

that you are still in the Engineer Menu.

2.2 Exiting The Engineer Menu

On completion of programming, the system can be returned back to normal mode by:

METHOD ONE

 Use the scroll keys: and  to scroll

to “EXIT ENGINEERS MODE”

 Press the key

 You will be returned to day mode

METHOD TWO

 When the display shows any main menu

item (i.e. an item shown in capitals) press

the  key, you will be returned to day

mode.

Please see page: 62, for all fault codes that may appear when exiting Engineers.

1 2 3 4 5 6 7 8 9 10 11 12 ... 67 68

Sem comentários

CASTLE EURO Manual de Instalação Página 7